Hover over image to zoom in
Brand:
genericVehicle Ultrathin HID Xenon Bulb Headlight Front Lamp 9005 6000K 35W
About this item
Power consumption is reduced by at least 40%, greatly reducing the burden on the vehicle's power system and correspondingly improving vehicle performance.
The brightness is increased by 100%, and the illumination is higher, wider and farther.
In the event of an accident, the sensing circuit in the high voltage package can immediately cut off the high voltage to protect the safety of personnel.
Highly insulated wires and anti-electromagnetic interference design are safe and reliable.
Easy to install, only need to connect the xenon lamp head to the original light source, fix the high voltage package, connect the power cable, and do not need to change the original components.
Unit size:
1 piece
Number of packs in one carton:
1
Min. Order Quantity:
1 piece
Stock location:
الصين
Estimated Lead Time (business days)
7 Days
International delivery:
Available shipping options, costs and estimated shipping times will be shown during checkout.
Carton dimensions (LWH):
22 cm x 18 cm x 7 cm
Carton weight:
530 g
Quantity (piece)
Minimum order quantity is 1 piece
Min. Order Quantity:1 piece
Shipping & Returns
Overview
Product description
Item Type: Front Lamp
Color: Shown as Picture
Power: 35W
Voltage: 12V DC
Luminous Flux: 3200lm-4800lm
Working Temperature: -40°C -105 °C
Working Noise: ≤5DBA
Life Expectancy: 5000 Hours
Light Bulb Model: 9005
Color Temperature: 6000K Pure White
Installation Steps:
1. Turn off the power on both sides of the vehicle and wait for the lights and engine to cool completely.
2. Open the car hood and remove the left and right headlight bus. If there is enough installation space, you can not remove the headlights.
3. Remove the vehicle side socket and the original headlight bulb.
4. Remove the protective cover from the HID bulb and install the HID bulb into the headlight. Please don't be too rough.
5. Connect the lamp leads to the ballast to ensure a reliable connection.
6. Connect the ballast power cord to the original lamp socket and check that the red and black wires are properly connected.
7. Fix the screw light with double-sided tape, fix the safety device in the engine compartment, and fix the wire set with a cable tie.
8. Turn on the power, test the light, turn off the power, straighten out the wires, and check again, then turn on the headlights.