Features:

Supports all brands of SAS/ SATA HDDs and SSDs. 

Stand-alone, FPGA-based operation (Non PC-based). 

Ultra-fast Speed transfers up to 18GB/min. (300MB/sec.) 

4 Copy Modes:  Quick copy: Copy data and system only. Supports Windows, Mac and Linux.

 All Partitions: Copy all defined partitions and skip HPA or unknown partitions. 

 Whole HDD: Bit-by-bit copy mode which copies exactly like the master device. 

 Percentage Copy: Users can set percentages of capacity to be copied. 

5 Sanitization Modes: Quick Erase, Full Erase, DoD Erase, 7-Pass Overwrite (DoD7), and Secure Erase. 

Compatibilities:

 Embedded controller is designed to support capacities over 18TB+. 

 Constant improvement supports latest market-available devices. 

- Supports all brands of HDDs and SSDs. 

- Supports GPT, MBR, and Advanced Formats.

- Supports 1.8”/2.5”/3.5” SATA/SAS HDDs and SSDs without adapter. 

- Supports mSATA, microSATA and M.2 (Requires adapters). 

Special Features:

 Customized Settings:  Allow users to set hard drive motor start and stop time. 

 Event Log Management: 

- Records: operating durations, individual port copy progressions, connected hard drive models, capacities, serial numbers, and PASS or FAIL results. 

- Log report files are generated through the USB port and are saved to USB devices.

Hardware Design 

 The Fast Key (“GO” button) allow users to perform asynchronous erase for each port. 

 Light weight, tiny size and portable