SUNSKY Billiard Cue Head Repairer Skin Head Turner Polishing Curve Repairer Cue Head Replacement Tool 11 In 1

1. Big head shaving mode: insert the cue with the head installed vertically into the hole of the cutter and turn counterclockwise to repair the edge of the head, shaving the head
2. Tip fixing/tip edge compaction: when replacing the tip, insert the tip into the fixing hole with a drop of glue to make the tip more firmly affixed, and after repairing the tip curvature, insert the tip into the curvature hole and press it to increase the strength of the tip edge
3. Tip prick: sharp needle prick on the tip, can be too hard to loosen the tip, the tip of the top of the tip is too slippery can also increase its surface roughness, easier on the powder
4. Leather head trimming: tilt the club against, gently rotate to trim a variety of curvature
5. U-face sanding: steel U-shaped curved sanding piece, the leather head can be carefully sanded to the appropriate curvature of personal use habits
6. Flat sanding: to smooth out the glue residue on the corners of the club or the unevenness on the bottom of the new leather head
7. Arc grinding: insert the club vertically into the arc hole shaping, random rotation can be sanded into a rounded shape of the leather head
8. Small head rod chipping head mode: insert the club with the head installed vertically into the hole of the reel, turn the club counterclockwise to repair the edge of the head and chip the head
9. Head cleaning: when replacing the head, rotate the cue to remove the head residue
10. Size: about 8 x 3 x 2.45cm