Solar Charger Dual USB Power Bank Case DIY Kit With LED Flishlight For Outdoor Backup Gold

NOTE:
1. This is a power bank kit (including circuit board and shell), not a finished product. Not including battery and screw, you should buy 5 * 18650 batteries and screw, and install them by yourself. The cable is not included either.
2. DO NOT support free soldering, you must have related knowledge and tools before assembling it.
 
Description:
This power bank is with dual USB , which allows charging 2 devices simultaneously. This charger can intelligently identify and charge your device at high speed. Safety protections ensure you safe charging. It is equipped with solar panel, put it under sunshine and it can recharge the battery itself. And the flashlight function makes it a great helper in the dark. It will be your first choice for outdoor activities!

Features:
1. Dual USB Ports: Charge two devices simultaneously. 2A USB port for iPad/Tablets, 1A USB port for cellphones or other electronic devices.
2. Equipped with solar panel, which could recharge the battery itself under sunshine for emergency purpose while outdoor.
3. 3-level brightness LED light: use it as a flashlight in the dark.
4. You can check the remaining battery power on the charger.
5. Over-charge, over-discharge, over-heat, over-power, over-voltage and short circuit protection, much safer charging.

Specifications:
Color: Black, Silver, Blue, Gold, Rose Red (Optional)
Material: Aluminum + Plastic
Size: Approx. 124 * 79 * 21 mm / 4.9 * 3.1 * 0.8 inch
Interface: 2 * USB Ports, 1 * Micro USB Port
Micro USB Input: 5V 1A
Dual USB Output: 5V 1A, 5V 2A
Battery: 5 * 18650 (NOT included)
Package Weight: About 100g

Package Included:
2 * Aluminum Shell (top & bottom)
1 * Plastic Middle Frame
1 * Circuit Board
1 * Solar Panel
1 * Led Panel
1 * Diffusion Panel
1 * Button
1 * Transparent Button
(Other items in the pictures are not included.)

Manual:
1. Connect the  B+ (B-) on the mainboard to the battery positive (negative) pole.
2. Connect s+ (s-) to + (-) on the solar panel.
3. Connect LED+ (LED-) to + (-) on LED light panel.