Mini RF Remote Controller 2812/2811/6803 LED Strip Light Lamp DC 5-24V With 17 Key Remote

Description:
TheRF wireless remote control widely applies to LED color light strip. Bring gorgeous, happyand lively atmosphere to your life. Specially suitable for home decoration,birthday night party, wedding party etc. Compatible almost all kinds of singleor double line LED motor IC likes 2811, 2812, 6803, 1903. Don't miss the amazingitem!
 
Features:
TheRF wireless remote controller has many advantage likes sensitive and humanizedoperation, convenient wiring. RF wireless Radio frequency distance can be about8~15M.
Morethan 300 kinds of pattern effect, gorgeous and vivid.
Adjustablecascade points can control at most 2048 pixels.
Withuser setting saving function if power off, grey level adjustment function, brightnessadjustable, convenient for your use.
Preventingreverse connection of power supply.
 
Specifications:
Condition:100% Brand New
Name:Mini RF Remote Controller
ApplicableIC Type: 2811, 2812, 6803, 1903
InputVoltage: DC 5~24V
WorkingCurrent: < 10mA
WorkingTemperature: - 20~60℃
SignalType: Wall Through
RemoteBattery: 1pc CR2025 button battery (Not included)
DCSize: Approx. 5.5 x 2.1mm / 0.22 x 0.08inch
PackageWeight: 30g
 
Operation:

Light Test Function Press AUTO KEY Continuously for 5 times until light extinguishing, release AUTO KEY and enter switch model, light change to red, green, blue, yellow, purple, cyan and white effect for lighting test
Matching Continuously pressing the MATCH button 5 times until LED flash in white quickly to match the remote control with the receiving controller. Pressing the MATCH button for 5 times until LED flash in white slowly to un-match
Reorder R/G/B Line Sequence Differ from kinds of LED, The R/G/B keys may not perfectly match to your LED, Reorder them if needed. Continuously pressing the SETTING button 5 times until LED flash in white once and then turn into all white. Pressing the R button until LED is red, Pressing the G button until LED is green, pressing the B button till LED is blue, then press the SETTING button once to confirm your setting
Adjusted Pixels Default setting controlled pixels amount is 600 pixel. Press SETTING continuously 5 times until LED flashing. After LED flashing once and then turn into all white. Press mode+ and mode- to add or decrease pixels, (Each pressing add or decrease 60 pixels). Then press SETTING button to save your setting. Pixels adjustment range: 300~2048pixels.
Catching When in the AUTO mode, pressing the SETTING button once, and then press MATCH button once to catch the Current pattern to stay and operate circularly   
PackageIncluded:
1x RF Remote Controller
1x Remote (Not Included Battery)

Note: The R/G/B marked on the remote controller is independent static light color shortcut key, the product is 3-channel controller, that is not suitable for RGB strip light.