Condition: 100% Brand New
Item Type: Digital Oscilloscope
Material: ABS + Metal
Model: JDS3082A
Oscilloscope Function
Maximum Sampling Rate 500MSa/S
Analog Channel 2
Digital Channel No
Bandwidth 80MHz
Vertical Resolution 8 Digits
Vertical Gear 10mV-5V (Probe 1X)
100mV-50V (Probe 10X)
1V-500V (Probe 100X)
(1, 2.5, 5 Steps)
Input Resistance 1MΩ2%, 20±5pF
Input Coupling AC\DC
Display Mode Y-T, X-Y
Input Voltage 40V (Probe 1X)
400V (Probe 10X)
4000V (Probe 100X)
Time Base 10ns-50ms (1, 2.5, 5 Steps)
100ms-5s (Scan)
Storage Depth 16k per Channel
Trigger Mode Automatic, Normal, Single
Trigger Type Rise, Fall
Automatic Detection Support (50Hz-60MHz)
Computation CH1+CH2, CH1-CH2, CH2-CH1
Measuring Peak-to-peak, Duty Cycle, Frequency, Period, Maximum, Minimum, Average, Root Mean Square
Cursor Time, Voltage
Multimeter Function
Full Scale Reading 6000 Count
DC Voltage 60.00mV, 600.0mV, 6.000V, 60.00V, 600.0V, 1000V
AC Voltage 60.00mV, 600.0mV, 6.000V, 60.00V, 600.0V, 750V
DC Current 60.00mA/600.0mA, 6.000A/10.00A
AC Current 60.00mA/600.0mA, 6.000A/10.00A
Resistance 600.0Ω, 6.000kΩ, 60.00kΩ, 600.0kΩ, 6.000MΩ, 60.00MΩ
Capacitance 40.00nF, 400.0nF, 4.000μF, 40.00μF, 400.0μF, 4000μF (Use this function to maintain 30s at both ends of the capacitance)
Diode 0V~2.0V
On-off Detection Detect in 600.0Ω Level, Make a Sound When Below 30Ω
Signal Generator
Frequency Sine Wave (1Hz-20MHz), Square Wave (1Hz-5MHz), Triangular Wave / Ramp Wave (1Hz-1MHz)
Duty Cycle 0%-100%
Amplitude 100mV-4V
Offset +\- (0V-2V)
Serial Port Center
Baud Rate 115200-1200
Data Bit 8, 9
Check Digit No Parity, Odd Parity, Even Parity
Stop Bit 1, 0.5, 2, 1.5
Decimal 10, 16
Recorder
Time Base 100ms-5s
Record Length Record a set of waveforms per second, up to ten minutes
Other
Screen 4.5 Inch, 16-bit True Color, TFT 400x272
Battery 2 x Lithium Battery (18650)(Battery Not Included), can work continuously for 8-10 hours