Features:
This is a 2 in 1 device that can be used as a DSO or a multimeter.
It supports auto-scale function, USB data transmission supported.
Bandwidth is 20MHz; 20 automatic measurements.
It uses rechargeable Li-ion battery(not included) as power supply, up to 6-hour backup.
Application for electronic circuit debugging, circuit testing, design and manufacture, education and training, automobile maintenance and testing.
Specifications:
Model HDS1021M-N
Bandwidth 20MHz
Sample Rate (realtime) 500MS/s
Horizontal Scale (s/div) 5ns/div~100s/div, step by 1~2.5~5
Rise Time (at input, typical) ≤17.5ns
Display 3.7'' color TFT display (640 x 480 pixels)
Channel single
Input Impedance 1MΩ± 2%, in parallel with 18pF± 5pF
Record Length max 6K points on each channel
Interpolation sin (x) / x
Probe Attenuation Factor 1X, 10X, 100X, 1000X
Input Coupling DC, AC,and GND
DC Accuracy (average) average > 16: ± (3% reading + 0.05div) for V
Vertical Sensitivity 5mV/div~5V/div (at input)
Vertical Resolution (A/D) 8 bits
Max Input Voltage 400V (PK - PK) (DC + AC, PK - PK, 1MΩ input impedance,probe attenuation 10 : 1), CATII
Trigger Type Edge, Video
Trigger Mode Auto, Normal, Single
Trigger Level ± 6 divisions from screen center
Acquisition Mode Sample, PeakDetect, and Average
DC Gain Accuracy ± 3%
Automatic Measurement Vpp, Vavg,Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Overshoot, Pre-shoot, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay A--B, Delay A--B
Waveform Storage 4 waveforms
Communication Interface USB
Power Supply 100V-240V AC, 50 / 60Hz
Plug TypeUS Plug
Li-ion Battery 7.4V, 6 hours' operation
Size 18.5*12cm/7.3*4.7in
Weight 1699g (approx.) Multimeter Specifications:
Full Scale Reading 3-digit (max 4000-count) diode 0V - 1.5V
Input Impedance 10 MΩ On / Off Test
Voltage VDC : 400mV, 4V, 40V, 400V, 1000V : ±(1% ± 1 digit); max input : DC 1000V VAC : 4V, 40V, 400V : ±(1% ± 3 digits), 750V : ±(2% ± 3 digits); Frequency : 40Hz - 400Hz; max input : AC 400V (virtual value)
Current DC : 40mA, 400mA : ±(1.5% ± 1 digit), 20A : ±(3% ± 3 digits) AC : 40mA : ±(1.5% ± 3 digits), 400mA : ±(2% ± 1 digit), 20A : ±(5% ± 3 digits)
Impedance 400Ω : ±(1% ± 3 digits), 40KΩ - 4MΩ : ±(1% ± 1 digit), 40MΩ : ±(1.5% ± 3 digits)
Capacitance 51.2nF~100uF : ±(3% ± 3 digit)
Package Includes:
1 x Oscilloscope Kit
Note: Please kindly make a note if you need any plug adapter.