Condition: 100% Brand New
Item Type: DC/AC Clamp Leakage Current Sensor
Material: ABS

Model ETCR007AD
Functions Measuring AC/DC current, leakage current
Power Supply Zinc-manganese dry battery, 6RL61 9V (not included). Continuous use for 100 hours, or external power supply for long-term use.
Test Mode Clip-on CT, non-contact measurement
Clamp Size Approx. Φ 7mm / 0.3in
Input Range 0mA-60.0A AC/DC
Output Voltage 10mV / ONE; 100mV / ONE (Corresponding)
Output Range Up to 1V peak
Resolution 1mA AC/DC
Accuracy ±3%FS (23℃±5℃, less than 5%RH)
Phase Error ≤3°(AC 50Hz/60Hz; 23℃±2℃)
Calibration Adjust the 0 position for calibration to eliminate external electric field interference
Output Wire Core wire: signal positive output; shielding wire: signal ground
Lead Length 2 Meters / 6.6ft
Frequency DC 400Hz
Test Location Tested wire in the center of the jaw
Line Voltage AC600V
Current Operation 5mAh
Working Temperature and Humidity -10℃-50℃, relative humidity below 80%
Limit Temperature Error -10℃-0℃ and 40℃-50℃, within 2% of reading
Storage Temperature and Humidity -10℃-60℃, relative humidity below 70%
Insulating Strength AC3700V/rms (between the alloy of the clamp and the housing)
Product Size Approx. 165 x 45 x 32 mm / 6.5 x 1.8 x 1.3 in
Weight Approx. 223g / 7.9oz