Disassembled Digital Storage Oscilloscope DIY Set Signal Analyser (15002K Unsoldered SMT)

Description:
This is an upgraded digital storage oscilloscope kit(disassembled parts) with significant improvements in structure, mechanical and operation. Display and MCU are now mounted on the same board to avoid using inter-board pin-headers. Soldering  pin-headers often caused many problems for beginners. Analog channel is placed on a separated board. This brings in better separation between analog and digital circuits. Without the analog portion, main board is actually a general purpose control board that can be used in many other applications. 

Features:
Support automatic, regular and single trigger mode, convenient to capture instant waveform.
Rising or falling edge triggering are both available.
Trigger voltage level position is adjustable with indicator.

Waveform before trigger could be observed(negative delay).

Waveform display could be frozen at any time(HOLD function).

With 1KHz/3.3V square wave test signal source.

With waveform parameter digital display, can display the parameter of frequency, cycle, pulse width and duty cycle, maximum value, minimum value, average value, peak and valid value.

Save/recall waveform function, waveform does not disappear when shutdown.
Comes with full shell enclosure, the front panel and top/bottom brackets are flexible for easy modification.
Rotary encoder switch makes parameter adjustment much quicker and easier.

Specifications:
Max. Real-time Sampling Rate: 1Msps
Accuracy: 12Bit
Sampling Buffer Depth: 1024 bytes
Analog Bandwidth: 0-200KHz
Vertical Sensitivity: 5mV/Div - 20V/Div (progressive by 1-2-5 )
Vertical is adjustable with indicator
Input Impedance: 1MΩ
Max. Input Voltage: 50Vpp(1:1Probe), 400Vpp(10:1Probe)
Coupled modes including DC/AC/GND
Horizontal Timebase Range: 10μs/Div - 50s/Div (progressive by 1-2-5)
Shell Size: 10 x 7.5 x 2.2cm / 3.93 x 2.95 x 0.86"
Type: 15001K soldered SMT, 15002K unsoldered SMT(Optional)

Package Includes:
1 x Digital Storage Oscilloscope(Disassembled Parts)

Note:
This kit requires electronic knowledge and ability, please make sure you know how to assemble and use it.
Both type are disassembled parts, the main difference is whether SMT components are soldered or not.