Digital 2.1 Channel Amplifier Board Bluetooth USB TF Input 50W+50W Stereo 100W Subwoofer Output

Description:
This is an audio power amplifier board that strengthens low-power, inaudible electronic audio signals such as the signal from radio receiver or electric guitar pickup to a level that is strong enough for driving loudspeakers or headphones. Power amplifiers make the signal audible to listeners. It is the final electronic stage in a typical audio playback chain before the signal is sent to the loudspeakers and speaker enclosures.

Features:
Digital amplifier has a higher overload capacity than analog amplifier, and it won't cause crossover distortion, transient inter modulation distortion and you don't have to worry about the loudspeaker internal resistance.
It supports many audio input ways including Bluetooth, USB, TF card and audio input jack.
Dual channel of 50W+50W power output, 100W subwoofer output and a wide input voltage range from 12V to 26V DC.
Power supply of 24V DC and more than 5A is recommended to avoid intermittent sound, or 24V 3A if speak power is small.

Sound quality is very good by using this audio power amplifier module.

Applicable speaker impedance are 4/6/8 ohm, great for turning normal speaker into Bluetooth speaker.

Specifications:
Chip: TPA3116

Audio Input: Bluetooth, USB, TF, audio input jack
Audio Format: MP3, WMA, WAV, FLAC
Output Power: 50W+50W(stereo)+100W(subwoofer)
Suitable Impedance: 4, 6, 8ohm speaker
Input Voltage: 12~26V DC
Size: 124 x 80mm / 4.88 x 3.15"

Package Includes:
1 x Amplifier Board