Condition: 100% Brand New
Item Type: Dental Cleaning Jet
Water Pressure: 0.2mpa ~ 0.4mpa
Air Pressure: 0.28Mpa ~ 0.35Mpa
Maximum Water Spraying Amount of Working Head: ≥25ml/min
Maximum Sandblasting Amount of Working Head: ≥3g/min
Work head can be sterilized at high temperature (handle cannot be sterilized)
Method of use
1. Preparation
(1) Under the condition that the water and air are closed, unscrew the top cover of the gun body, confirm that the sand container is absolutely dry, pour into the 9-gram sandblast gun (about 2/5 of the height in the jar), then screw the top cover of the gun body and tighten it
(2) Check whether the water and air pressure of the dental chair is within the prescribed range, and the compressed air should be clean, dry and oil-free
(3) Patients and doctors are advised to wear goggles at work
2. Clinical Operation
(1) Place the nozzle of the working head 3~5 mm away from the patient's tooth, 30~60° away from the tooth, step on the foot switches (foot switches of the tooth chair), and start the sand-spraying gun.The smaller the Angle between the nozzle and the tooth, the larger the cleaning surface.During use, it is better to move the nozzle by drawing a small circle.The nozzle can only face the dentine.
(2) The working head of the front end of the sand gun can be rotated (120° with standard curved Angle) to adjust the direction of the nozzle to use different parts of the mouth.
(3) If the sandblast gun is only blocked during use, loosen the foot switches and suspend use.Disconnect the sandgun from the interface of the high-speed mobile phone head and dredge it according to the method of "notice no. 1".
(4) At the end of use, release the foot switches first, and remove it from the mouth of the patient after the sandblasting gun stops sandblasting.
Please rinse the patient's mouth with water immediately.