Car Auto Glass Windshield Repair Kits Chip Crack DIY Glass Repair Tool Sets New

Car Auto Glass Windshield Repair Kits Chip Crack DIY Glass Repair Tool Sets 
Specifications:
Condition: 100% Brand new
Name: Auto glass Repair combination
Color: as pictures show
Material: Resin & PVC

Advantages:
To prevent holes or cracks widen, to ensure traffic safety.
Without dismantling, avoid bad seal and replace damaged vehicle glass.
Reduce waste glass, comply with environmental trends.
durable repair and restore the original strength of the glass, improve the appearance, clarity of up to 95%.
DIY self-repair, on-site construction, repair quickly and save time.
For you save money of replacement glass.
Prevents damage spread.
Allows anyone to fix a damaged windshield or window.

Repair liquid:
Using the highest purity repair liquid to ensure the performance of your
construction after construction, no crack, no yellow and  transparent
better.

Repair range:
Car windshield, window glass, building glass, all kinds of glass damage.

Instructions:
Step 1: Clean
the damaged place, ensure no water vapor in the damage place, at 45 Centigrade
the glass surface will help repair resin infiltration.
Step 2:The center of  suction cup bracket is aligned at a damage place and fixed.
Step 3: Pressure rods,injection hose
The pressure  rod is inserted injection pressure hoses, screwed in the end the Ministry.
Step 4: Drops 2-3 repair liquid at the injection hose
Step 5:
The injection hose bracket screwed to ensure white rubber head against the
glass(Note:You can not let the rubber head deformed,so that the resin
does not bleed out)
Step 6: Removed the pressure rods,  you need to slow in  this process, to form a vacuum process.
Step 7: After removing the pressure rods and then drops 3 drops of repair solution at the injection hose.
Step 8: Tighten the pressure rods, can not twist in the bottom. general distance the bottom 1 cm, then hold for about 1 hour.
Step 9: Removed plastic injection device and immediately drop a repair liquid at the repair place.
Step 10: Paste
the Solidify film, then use the razor blade scrape several times on the
Solidify film, so that the layer becomes thinner, it can help to
Solidify.
Step 11: Removed
the mend part to the sunshine place Irradiated 10 minutes(only
covering with the cured film can be use).  After curing  scrape off the
excess glue.

Package included:
1x plastic injection bracket
1x plastic injection device
1x  pressure rod
1x  repair filler
1x blade
2x cured film