Animal Tag Microchip Reader ISO Chip Portable Pet Dog Cat Scanner 134.2khz For Rfid Glass Tag/Rabbit Ear Tag White

Introduction:
This is a low frequency tag scanner that adopt wireless identification technology and it suppors reading EMID,FDX-B(ISO11784/85) etc.tag.
This scanner uses high brightness OLED display which can be seen clearly in bright light environment.
It can store max 128 records of tag information with its built-in memory, users can upload the information to the computer through USB cable.
This product is stable with simple operation which is widely used for little animal management, resource management, railway inspection etc.
Operation:
Turn on the device and scanning. Press scan button to turn on the device and on scanning model.
The tag NO.will be displayed on screen if detect a tag,display“No tag”if no tag is detected.
Device could be charged and uploaded data by USB cable.When device is connected by USB,"USB"will be displayed attop left corner, and on charging status for battery status.
Press scann button for 3s, data will be uploaded from the scanner, MAX 128 records.
After uploading successfully, display as below The data can be upload in real time if scanner is connected by USB cable when reading a tag.
Scanner will be off after 120s without working.
 
 
Notice:
Actual color may be slightly different from the image due to different monitor and light effect
Please allow 1-3cm deviation due to manual measurement
Description:
MODEL: W90A
WORKING FREQUENCY:134.2khz/125Khz
SUPPORT TAG: EMID, FDX-B(ISO11784/85)
READING/WRITING RANGE: 2-12mm glass tube label >5cm;30mm animal ear mark > 15cm (related to label performance)
STANDARD IS0: 11784/89
READING TIME:100ms
PROMPT:0.91 "high brightness OLED screen, buzzer
POWER SUPPLY: 3.7V (lithium battery)
MEMORY: 128 pieces of information
COMMUNICATION: USB2.0
LANGUAGE: English or customized
WORKING TEMP: -10~50Celsius
STORAGE TEMP: -30~70Celsius

Package List:
1x Scaner