5PCS 1/4 Quick Connect Check Valve For Pure Water Reverse Osmosis System

Features:
100% Brand new and high quality.
Made of POM material, high mechanical strength, lubricity, and good wear resistance.
1/4 "quick connect.
Easy to install and operate.
Applicable to water, coffee and so on.

Installation
1. In the threaded fast joint thread with the appropriate thickness of the raw material band;
2. With the right force to tighten the quick connector, forced too much can break bad joints, the power is not enough to cause leakage;
3. The tube to be inserted at the top of the pipe with a pipe cutter straight cut (see the above cut tube method);
4. The tube wall to be inserted is smooth, clean and free of scratches
5. If scratches, should be scratched pipe cut off the vertical
6. Remove the blue clip, and cut the top of the tube into the quick connector, forced inserted in the end (see Figure 1);
7. In order to verify the pipe connection is firm, with the appropriate force pull the tube, the tube can not pull out;
8. in the quick connector chuck put on the clasp, to avoid the use of the pipe was accidentally pulled out;
9. Pull the chuck gently out of the quick connector so that there is a gap between the two;
10. Insert a snap ring between this gap (see Figure 2)

Demolition
1.first check whether the inlet pipe is closed to ensure that the water pressure is zero;
2.will quickly remove the snap ring;
3.one hand with the index finger and thumb to the chuck to the quick connector at the same time, the other hand to pull the tube can be.

Specification:
Condiiton: 100% Brand New
Color: Black / Silver Gray (Optional)
Material: POM
Size: (L) x (W) 46 x 21.5mm / 1.81" x 0.85" (appr.)

Package Included:
5 x Check Valve

Notice:
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please understand that colors may exist chromatic aberration as the different placement of pictures.