220V DN10 3/8 Electric Normal Closed Valve Electromagnetic Valve For Water Oil Air Gas

Description:
The solenoid valve is is a normally close type electric solenoid valve, power on to open it and power off to close it. Suitable for use with pipelines in water, air, oil and low viscosity non-corrosive fluid applications. Apply to: Space-limited, energy-efficient, home, hobbyist and etc.

Features:
This is a normally close type electric solenoid valve, power on to open it and power off to close it.
Suitable for use with pipelines in water, air, oil and low viscosity non-corrosive fluid applications.
There is an arrow sign on valve showing flow direction, please follow the sign to connect pipes.
Apply to: Space-limited, energy-efficient, home, hobbyist and etc.
This solenoid valve is designed to installed indoors horizontally in a dry environment. If used outdoors, the coil part should be well protected from water.

Specification:
Condiiton: 100% Brand New
Body material: Body zinc alloy + copper coil
Sealing material: NBR nitrile rubber
Use fluid: Water, gas, oil
Control form: Normally closed (power on, power off)
Thread diameter: 2W-10 3 points (3/8" , DN10)
Flow Caliber: 4mm
Temperature: -5℃~ 80℃
Use Pressure: 1 (mpa)

Package Included:
1 x Solenoid Valve

Notice:
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please understand that colors may exist chromatic aberration as the different placement of pictures.