Features:
1. DSSS and FHSS dual spread spectrum anti-interference technology was adopted.
2. Suitable for AT9, AT9S and AT10, AT10II transmitters.
3. PWM signal output working mode:red LED indicates PWM signal output, 9 channels totally.
4. S-BUS signal output working mode: blue LED indicates S-BUS signal output of the 9th channel. The original 1-4 channels output independent PWM signals of 7-10 channels and no signals output on 7-8 channels.
5. Integrated signal strength, voltage data return and RSSI values. Support extended engine voltage telemetry module PRM-01 and module PRM-02 to feedback GPS info, speed, voltage etc.
6. 9th channel can be set as S-BUS.

Specifications:   
Channels: Red LED indicates PWM signal output, 9 channels totally.
                 Blue LED indicates S-BUS signal output, supporting S-BUS and PWM signal working                  at the same time, 10 channels can be extended.
Working Voltage: 4.8-10V
Working Current: 38-45mA（input: 5V 3A）
Size: 43 * 24 * 15mm / 1.7 * 0.9 * 0.6inch
Weight: 12g
Section Precision: 4096, 0.25us per section
Type: Receiver

SBUS and PWM switching:
Press the switch (ID SET) on the side of the receiver for twice shortly (within one second) to complete CH9 normal PWM or SBUS signal switching.

Match code:
Each transmitter has its own ID code. The receiver must be matched code with the transmitter before starting to use. After code is matched, the ID code is stored in the receiver and there is no need to re-match.

How to match code with transmitter:
Put the transmitter and the receiver close to each other within 1m.
Turn on the transmitter, then the receiver will search for the nearest transmitter to match code.
Press the (ID SET) switch on the side of the receiver for more than 1 second and the LED flashes to indicate the start of matching code.
Stopping flashing means completion of matching code.
Please confirm that the servo can operate according to the transmitter.

Package Include:
1 x Receiver