1pc Automatic Step Up Power Supply Module Converter DC-DC XL6009 5-32V To 1.2-35V

Features:
1. Employed original chip.
2. Up to 400Khz operating frequency, and LC filter circuit, Low output ripple.
3. Imported TDK inductors to reduce heat and interference to low.
4. Input and output 3 MLCC multilayer ceramic capacitors, anti-interference and improve stability.
5.  PCB uses kb grade A sheet to eliminate cardboard and garbage board.
6. Built-in MOSFET, say goodbye to the LM2577 built-in transistor, can achieve 94% high efficiency.
7. Added enable port to control whether the boost circuit works.
Module parameters:
Input voltage: 5-32V
Output voltage: continuously adjustable (1.2-35V)
Output current: 1.5A (MAX)
Input current: 4A (MAX)
Output power: natural cooling 20W, plus heat sink 25W (MAX) actual power
Large output power = input voltage * 4A * conversion efficiency
Output ripple: Input 12V output 24 0.5A ripple 30MV 20M bandwidth (for reference only)
Operating temperature: industrial grade (-40 Celsius to +85 Celsius) (ambient temperature exceeds 40 degrees, please reduce power usage, or enhance heat dissipation)
Full load temperature rise: 45 Celsius
Working frequency: 400khz
No-load current: typical 15mA (5V to 12V)
Load adjustment rate: ±0.5%
Voltage regulation rate: ±0.5%
Dynamic response speed: 5% 200uS
Enable control port: Yes, high level 1.4V-VIN(ON), low level 0-0.8V (OFF), default high level
Short circuit protect: none (please install fuse or protection circuit at input)
Input reverse connection protect: no

Package List:
1 x Automatic Step Up Power Supply Module