حرك مؤشر الماوس فوق الصورة للتكبير

الماركة:

Morelian

ATOMSTACK P7 40W Laser Engraver Desktop DIY Engraving Cutting Machine with 200*200 Engraving Area Compression Fixed-focus Laser for Metal Wood Bamboo Leather UK PLUG

د.إ 1,468.8050% خصم
د.إ734.40
لكل قطعةشامل ضريبة القيمة المضافة
1 قطعة
د.إ 1,468.8051% خصم
د.إ712.37
لكل قطعةشامل ضريبة القيمة المضافة
2 - 9 قطعة
د.إ 1,468.8054% خصم
د.إ675.65
لكل قطعةشامل ضريبة القيمة المضافة
10+ قطعة

UK PLUG

UK PLUG

EU PLUG

EU PLUG

نقبل
الدفع عند الاستلام
التحويل المصرفي
حد ائتمان

معلومات عن هذا المنتج

Newly Upgraded Ultra-fine Compression Laser: the laser adopts 4-fold lens group collimation and focus technology, the optical power is 4.5~5.5W, the laser focus area is reduced to 0.02mm², the high-density laser can easily cut 10mm thick wood boards

Upgraded Version of High-performance Fixed-focus Laser: Engraving can be done without adjusting the focal length; the newly upgraded compressed spot increases the energy concentration by 200%

Eye-protection Flame-retardant Filter Panoramic : The flame-retardant filter panoramic can filter 97% of the ultraviolet light, which plays a very good role in protecting your eyes.

Wide Compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system

More Humanized & Safe Design: ith knob for easier to adjust the height of the laser and a horizontal gyroscope auto stop working when it is tilted.

كمية (قطعة)

الحد الأدنى لكمية الطلب هو 1 قطعة

الحد الأدنى للطلب:1 قطعة

معلومات عن البائع

معتمد

الصين

المزيد من هذا البائع

نظرة عامة

معرف وحدة إدارة المخزون للبائع:
SHTDOS5897UKPY
ورقة المواصفات الفنية متوفرة حسب الطلب
لا
Gender
Dangerous goods
No
Item height
13.5
Item length
49
Item weight unit
g
Item width
27
Item dimensions unit
cm
Item weight
3572.1

وصف المنتج

stainless steel; Cutting Material:cardboard, non-woven fabric, veneer, acrylic, some thin plastic board, sponge, MDF, leather; Spot Size:0.02㎡ Laser Power:40W Laser Output power:4.5-5.5W Wave Length:445 ± 5nm Engraving Accuracy:0.01mm Focusing Method:fixed focus laser, no need to focus Laser Protective Cover:Protect the user's eyes and prevent pets from grabbing the laser spot. Operating Software:Compatible wiith LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system. Input Format:NC, BMP, JPG, PNG, DXF, etc. Data transmission Method:USB connection. Machine Size:382*420*146mm/ 15*16.5*5.7n Machine Weight:3kg/ 6.6lb Package Size:490*275*135mm/ 19.2*10.8*0.5in Package Weight:4651g/10.2lb Packing List: Assembly block*4 Laser Module*1 Laser Slide*1 Foot Pad Foam*4 USB Cable*1 Open Wrench*1 Y-axis Belt Assembly*1 Marker *1 Cable Tie*5 Screw*4 Hexagonal Wrench*2 Wood Chips*3 Fixed Focus Film*1 Acrylic Sheet*3 Cutting Pad *1 Lower Support Foot*1 Upper Support Foot*1 Control Box*1 X Axis Assembly*1 Y Axis Assembly*1 Power Adapter*1 Power Cord*1 Note: When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. Please do not touch the laser emitter with your hand, or it may burn your hand. Please avoid b impact on the machine. Children under 14 are not allowed to use this product and children over 14 need adult supervision. The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.