10/20/30A Amp Solar Panel Regulator 12V/24V Solar System Controller With Dual USB Interface Battery Charge 10A

Features:
1. Build-in industrial micro controller.
2. One-key setting, auto memory function. Digital display.
3. With double USB ports charge. 4-stage PWM charge management.
4. There are Build-in short-circuit protections, open-circuit protections, reverse protections, over-load protections, low heat productions.
5. The Regulator is only suitable for lead acid batteries: OPEN, AGM, GEL.
Safety Instructions:
Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
The battery cable should be as short as possible to minimize loss.
The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL
Not suited for nickel metal hydride, lithium ions or other batteries.
The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
System Connection:
Connect the battery to the charge regulator - plus and minus. it will show 1, if it detects 12V battery, 2 if it detects 24V battery.
Connect the photovoltaic module to the regulator - plus and minus.
Connect the consumer to the charge regulator - plus and minus.
Notice:
Actual color may be slightly different from the image due to different monitor and light effect.
Please allow 1-3cm deviation due to manual measurement.
Description:
Rated Voltage: 12V 24V Auto
Application: Solar System Controller
Current: 10A/20A/30A
Size: 150*78*35mm
Max. PV Input Power: As follows
10A--130W (12V) 260W (24V)
20A--260W (12V) 520W (24V)
10A--390W (12V) 780W (24V)
Color/Style: As the picture shown

Package List:
1x Solar Panels Battery Charge Controller
1 x User Manual