حرك مؤشر الماوس فوق الصورة للتكبير
الماركة:
وايكونمعلومات عن هذا المنتج
CHARACTERISTICS - WEICON Silicone N is solvent-free, non-corrosive, strongly adhesive, permanently elastic, resistant to weathering, chemicals and temperatures up to +180°C.
DETAILS - The adhesive can be used universally and adheres very well to all metals, glass, crystals, ceramics and many other materials.
APPLICATION - Silicone N can be used in plastics processing, in the electrical industry, in trade fair and shop construction and in many other areas of industry.
QUALITY - 100% German quality - The product meets the highest quality standards in compliance with physical, safety, toxicological and ecological standards.
Surface pre-treatment- Surfaces must be clean and free of grease. Many surface soilings, such as oil, grease, dust and dirt can be removed with WEICON Surface Cleaner. For certain materials or special requirements, we recommend the use of a bonding agent (primer). Mechanical surface pre-treatment e.g. by grinding or sanding can also improve the adhesion considerably.
حجم الوحدة:
1 قطعة
عدد العبوات في كرتون واحد:
12
الحد الأدنى للطلب:
1 قطعة
موقع المخزون:
الإمارات العربية المتحدة
المهلة المقدرة (أيام عمل)
2 أيام
التوصيل دوليا:
سيتم عرض خيارات الشحن المتاحة والتكاليف وأوقات الشحن المتوقعة أثناء إتمام عملية الشراء والدفع.
أبعاد الكرتون (الطول ، العرض ، الارتفاع):
سم 30 x سم 30 x سم 30
وزن الكرتون:
1 كجم
كمية (قطعة)
الحد الأدنى لكمية الطلب هو 1 قطعة
الحد الأدنى للطلب:1 قطعة
وصف المنتج
WEICON Silicone N is free of solvents, neutrally vulcanizing, strong, permanently elastic, resistant to weathering, ageing and chemicals, temperature-resistant up to +180°C (+356°F), extremely elastic (breaking elongation of approx. 550%) and can be used universally. Silicone N adheres very well to all metals, glass, ceramics, and many other materials. Silicone N can be used in plastic processing, the electrical industry, energy technology, the lighting industry, exhibition construction and shopfitting, and in many other industrial areas.
Technical Data
Base 1-C. Poly siloxane (oxime)
Cure type moisture-curing
Standfestigkeit_Ablauf ASTM D 2202 1.0 mm
Density 1,01 g/cm³
Curing condition from +5°C to +40°C and 30%to 95% rel. air air humidity
Processing temperature +5°C to +35°C
Curing speed in the first 24 h 2 -3 mm
Skin-over time 7 min.
Gap bridging up to max. 5 mm
Max. sealing joint width 25 mm
Tensile strength ISO 37 / S3A 1,5 N/mm²
Tensile strength of the pure adhesive and sealant ISO 37 1,5 N/mm²
Elongation at break ISO 37, S3A 550 %
Elongation at 100 % ISO 37 S3A 0,4 N/mm²
Movement absorption max. 25 %
Volume change DIN 52451 <-6 %
Hardness (Shore A) DIN ISO 7619 20±5
Temperature resistance -50°C to +180°C
Resistance 1·10^¹² Ω·m
Dielectric strength 17,0 kV/mm
Building material class DIN 4102 B 2