For different regions, we provide multiple LTE Cat-4/Cat-1 HATs to choose from:

SIM7600A-H 4G HATLTE Cat-4mainly applicable in North America (US, CA)SIM7600E-H 4G HATLTE Cat-4mainly applicable in Europe, Southeast Asia, West Asia, Africa, China, South KoreaSIM7600E LTE Cat-1 HATLTE Cat-1A7600E Cat-1/GSM/GPRS HATSIM7600SA-H 4G HATLTE Cat-4mainly applicable in Australia, New Zealand, Taiwan, Latin AmericaSIM7600CE 4G HATLTE Cat-4mainly applicable in China, and some Southeast Asia countriesSIM7600CE-CNSE 4G HATA7600C1 Cat-1/GSM/GPRS HATLTE Cat-1SIM7600G-H 4G HATLTE Cat-4the global version

Please check the supported bands according to your local service provider, select the proper one when placing order.

Overview

The SIM7600CE 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.

You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.

Features

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
• Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
• Supports GPS, BeiDou, Glonass, LBS base station positioning
• Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
• Onboard CP2102 USB to UART converter, for serial debugging
• Breakout UART control pins, to connect with host boards like Arduino/STM32
• SIM card slot, supports 1.8V/3V SIM card
• TF card slot for storing data like files, messages, etc.
• Onboard audio jack and audio decoder for making telephone call
• 2x LED indicators, easy to monitor the working status
• Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
• Baudrate: 300bps ~ 4Mbps (default: 115200bps)
• Autobauding baudrate: 9600bps ~ 115200bps
• Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
• Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
• Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Communications Specifications　LTEWCDMA / TD-SCDMA / CDMA 2000EDGEGSM/GPRSBandSIM7600A-HLTE-FDD B2/B4/B12UMTS/HSPA+ B2/B5Not availableSIM7600E-HLTE-FDD B1/B3/B5/B7/B8/B20LTE-TDD B38/B40/B41UMTS/HSPA+ B1/B5/B8GSM/GPRS/EDGE 900/1800 MHzSIM7600SA-HLTE-FDD B1/B3/B5/B7/B8/B20LTE-TDD B38/B40/B41UMTS/HSPA+ B1/B5/B8GSM/GPRS/EDGE 850/900/1800/1900MHzSIM7600CE-T / CE-CNSELTE-TDD B38/B39/B40/B41LTE-FDD B1/B3/B5/B8UMTS/HSDPA/HSPA+ B1/B8TD-SCDMA B34/B39CDMA 1X/EVDO BC0GSM/GPRS/EDGE 900/1800 MHzSIM7600G-HLTE-TDD B34/B38/B39/B40/B41LTE-FDD B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19GSM/GPRS/EDGE 850/900/1800/1900MHGeneration4G3G2.5G2GEmitting power0.25W0.5W@EGSM9000.4W@DCS18002W@GSM9001W@DCS1800Data SpeedLTE CAT 4Uplink≤50 MbpsDownlink≤150 MbpsUMTSUplink≤384KbpsDownlink≤384KbpsEDGEUplink≤236.8kbpsDownlink≤236.8kbpsGPRSUplink≤85.6kbpsDownlink≤85.6kbps　　　HSPA+Uplink≤5.76MbpsDownlink≤42Mbps　　　　　　SIM CardNormal SIM (Not Included)GNSS Specifications

• Receiver type
  • 16-channel
  • C/A code
• Sensitivity
  • Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
  • Cold starts: -148 dBm
• Time-To-First-Fix (open air)
  • Cold starts: <35s
  • Hot starts: <1s
• Accuracy
  • Position: <2.5m CEP

SMS and Audio Specifications

• SMS
  • Supported types: MT, MO, CB, Text, PDU
  • Storage: USIM card and ME (default)
• Audio feature
  • Supports echo cancellation
  • Supports noise reduction

Other Specifications

• Power supply: 5V
• Operating voltage: 5V/3.3V (configured via jumper)
• Operating temperature: -30°C ~ 80°C
• Storage temperature: -45°C ~ 90°C
• Dimension: 56.21mm x 65.15mm

What's on Board

1. SIM7600CE-T
2. CP2102 USB to UART converter
3. NAU8810 audio decoder
4. TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
5. MP2128DT power chip
6. MP1482 power chip
7. Raspberry Pi GPIO header: for connecting with Raspberry Pi
8. SIM7600 control interface: for connecting with host boards like Arduino/STM32
9. SIM card slot: supports 1.8V/3V SIM card
10. TF card slot: allows file/SMS/... storage
11. 3.5mm earphone/mic jack
12. USB interface: for testing AT Commands, getting GPS positioning data, etc.
13. USB to UART interface: for serial debugging, or login to Raspberry Pi
14. MAIN antenna connector
15. AUX antenna connector
16. GNSS antenna connector
17. Power switch
18. Network status indicator
19. Power indicator
20. Operating voltage selection jumper:VCCIO - 3.3V: set operating voltage as 3.3VVCCIO - 5V: set operating voltage as 5V
21. UART selection jumper:A: access Raspberry Pi via USB to UARTB: control the SIM7600 by Raspberry PiC: control the SIM7600 via USB to UART

Dimension