مجموعة تريدلينج
product_image
1 / 1

المميزات

  • 90W Effect Laser Beam Shaping Technology: S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, can cut up to 15mm thick wood, 10mm acrylic, car
  • Fast Focusing Design: Combines a fixed focus lens and a sliding design. You only need to slide the laser and tighten the screws to complete the focusing. This makes it very easy to use.
  • Solid & Easy Assembly Structure: The full-metal structure design makes the machine work stably, and improves the engraving accuracy. The assembly can be completed in 10-20 minutes. The structural frame is very durable and available to upgrade. During
  • Wide Compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, switch system (LightBurn), and engraving file
  • Safe Design: The laser filter cover filters 98% of the ultraviolet light to the eyes. And comes with a A4 size steel pad to protect the table from laser damage. Isolate fire hazards.

السمات الرئيسية

معرف وحدة إدارة المخزونJM1-OS5916UK
الأبعاد (طول x عرض x ارتفاع)34cm x 12cm x 59cm
الوزن4814.4g
موقع المخزون
بلد المنشأ
العلامة التجارية

معلومات الشحن

الوزن لكل قطعة

4814.4 g

الأبعاد لكل قطعة (الطول × العرض × الارتفاع)

34 x 12 x 59 cm

وزن الكرتون

4814.4 g

أبعاد الكرتون (الطول × العرض × الارتفاع)

34 x 12 x 59 cm

عدد القطع لكل كرتون

1

موقع المخزون

consumes)
Diode Laser Power: 5.5-6W 
Laser Wave Length 455±5nm
Engraving Accuracy: 0.01mm
Focusing Method: Fixed focus laser + sliding device
Laser Protective Cover: The light filter cover on the laser protects the user's eyes and prevents animals grabing the laser spot.
Operating Software: Compatible with LaserGRBL, LightBurn, Benbox, GrblController, LiteFire,
etc.
Operation System: Compatible with switch system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.
Data Transmission Method: USB connection
Power Supply: International universal standard power input: 100-240V AC, 50/60HZ output: 12V 5A
Machine Weight: 3.0kg/ 6.61lbs
Package Weight: 4.4kg/ 9.7lbs
Package Size: 59 x 34 x 12cm/23.3 x 13.3 x 4.7in
 
Note:
●For detailed machine instructions, please refer to the manual for parameter settings.
●When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.
● Please do not touch the laser emitter with your hand, or it may burn your hand.
● Please avoid b impact on the machine.
● Children under 14 are not allowed to use this product and children over 14 need adult supervision.
● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.

Package List:
1× X axis assembly
2× X shaft
2× Y shaft
2 x Belt
1× Control box module set
3× Support feet
1× Laser module set
1× Power Supply
1× USB cable
1× Tool Kit
1× Goggles
1× 10x10cm  wood chip 3mm thickness
1×  10x10cm  wood chip 10mm thickness
1× A4 size steel desktop protection pad


SCULPFUN S9 Laser Engraving Machine Ultra-thin Laser Beam Shaping Technology High-precision Wood Acrylic Laser Engraver Cutting Machine 410x420mm Engraving Area Full Metal Structure Quick Assembly

جاهز للشحن

1472 د.إ
د.إ736
-50%
رسوم الاستيراد مستثناة
سياسة الإرجاع الخاصة بالبائع اعرف المزيد
4 قسط بدون فوائد، بدءًا من 184.00 د.إ
المدفوعات آمنه
حماية الخصوصية
بائع معتمد

الصفحة الرئيسية

التصنيفات

اكسبرس

عربة التسوق

الحساب