حرك مؤشر الماوس فوق الصورة للتكبير
الماركة:
عامOWON HDS1022M-N 3in 1 Dual- Channel Handheld Digital Storage Oscilloscope Multimeter Frequency MeterUK Plug 110~240V
معلومات عن هذا المنتج
Dual-channel oscilloscope, 20MHZ bandwidth, 100MS/s sampling rate, 5mV/div~5V/div high input sensitivity and large input range.
It can be used to detect various circuit boards, sensor signals and automatic range functions for testing and debugging.
3 digits multimeter, which can record data changes and generate curves on the screen, supports voltage, current, resistance, diode, capacitance and on-off testing.
Stored waveform, built-in four standard waveforms, can be edited by the host computer output various waveforms.
With 3.7in TFT (true color) LCD screen, the data display is clear and intuitive, and can be used for a long time.
Configuration of minimal keyboard design, stable performance, safe and reliable, simple and fast operation.
حجم الوحدة:
1 قطعة
عدد العبوات في كرتون واحد:
1
الحد الأدنى للطلب:
1 قطعة
موقع المخزون:
الصين
المهلة المقدرة (أيام عمل)
7 أيام
التوصيل دوليا:
سيتم عرض خيارات الشحن المتاحة والتكاليف وأوقات الشحن المتوقعة أثناء إتمام عملية الشراء والدفع.
أبعاد الكرتون (الطول ، العرض ، الارتفاع):
سم 43 x سم 29 x سم 14
وزن الكرتون:
2885 جم
كمية (قطعة)
الحد الأدنى لكمية الطلب هو 1 قطعة
الحد الأدنى للطلب:1 قطعة
الشحن والإرجاع
نظرة عامة
وصف المنتج
Item Type: Oscilloscope Multimeter Frequency Meter
Material: ABS
Color: As shown in the picture
Model HDS1022M-N
Bandwidth 20MHz
Real-time sampling rate 100MS/s
Rise time (typical on BNC) ≤17.5ns
Storage depth Up to 6000 points per channel
Channel Dual channel
Display 3.7in TFT (true color) LCD screen
Independent floating isolation channel The multimeter is isolated from the oscilloscope input ground
Time interval (△T) measurement accuracy Single: ± (1 sample interval + 100ppm × reading + 0.6ns), > 16 average: ± (1 sample interval + 100ppm × reading + 0.4ns)
Input coupling DC, AC, ground
Input impedance 1MΩ ± 2%, in parallel with 20pF ± 5pF
Time base range 5ns/div~100s/div, step by step from 1~2.5~5
Vertical sensitivity 5mV/div~5V/div (at input BNC)
Vertical resolution 8bit
Maximum input voltage 400V (DC+AC peak, 1MΩ input impedance) (10:1 probe attenuation)
Trigger type Edge trigger Rising edge, Falling edge
Video trigger Line, field, odd field, even field, arbitrary line trigger
Alternate trigger
Trigger mode Auto, normal, single
Automatic measurement Peak-to-peak, average, rms value, frequency, period, maximum, minimum, top value, bottom value, amplitude, overshoot, pre-shoot, rise time, fall time, positive pulse, negative pulse Wide, positive duty cycle, negative duty cycle, delay A→B, delay A→B
DC gain accuracy 0.03
Math operations Add, subtract, multiply, divide, invert, FFT
Store waveform 4 sets of waveforms
Lissajous pattern Bandwidth full bandwidth
Phase difference ±3 degrees
Cursor measurement Voltage difference between cursors (△V), time difference between cursors (△T)
U disk copy function Support, can link U disk for storage
Standard interface USB
Power supply Adapter / battery
Battery Built-in lithium battery 7.4V, 3500mAh
Size 180x113x40mm / 7.1x4.4x1.6in(L x H x W)
Weight 645g/22.8oz
Multimeter part performance parameters
Digital display 3 digits (maximum display 4000)
Input impedance 10MΩ
Voltage VDC : 400mV, 4V, 40V, 400V, 1000V : ±(1% ± 2 words); Maximum input voltage: DC 1000V VAC : 4V, 40V, 400V : ±(1% ± 3 words), 750V : ± (2% ± 3 words); Frequency range: 40Hz ~ 400Hz; Maximum input voltage: AC 400V RMS
Current DC : 40mA, 400mA : ±(1.5% ± 1 word), 10A : ±(3% ± 3 words)
AC : 40mA : ±(1.5% ± 3 words), 400mA : ±(2% ± 1 Word), 20A : ±(5% ± 3 words)
Resistance 400Ω : ±(1% ± 3 words), 4KΩ ~ 4MΩ : ± (1% ± 1 word), 40MΩ : ±(1.5% ± 3 words)
Capacitance 51.2nF~100uF: ±(3%±3 words)
Diode Voltage reading: 0V~1.5V
On-off test Determine the resistance < 50 Ω (±30Ω) (buzzer)）