Orthodontic Dental Bonding Kit Adhesive Light Cure Adhesive System Kit ToolsLarge Set

Condition: 100% Brand New
Item Type: Orthodontic Dental Adhesive 
Optional Type: Large Set, Small Set 
Material: Plastic 
Service Life: 18 Months
Storage Condition: Keep below 25℃ (do not freeze)
Suitable for: All kinds of dental orthodontic attachment adhesion
Main Technical Performance Index: Curing time not more than 3000 adhesive shear strength MPa>17.2
Usage:
1. Tooth preparation: cleaning the enamel surface of the teeth, remove dirt on the tooth surface, rinse the teeth thoroughly with water, isolate the teeth, and blow dry the tooth surface with oil-free and moisture-free air gun.
2. Acid-eroded tooth surface: apply the acid-eroded agent on the tooth surface, rinse thoroughly with water after 50-60 seconds, blow dry, and the tooth surface after acid-eroded is chalky. If there is no chalky appearance, the acid etching time is prolonged.
3. Primer: brush a thin layer of liquid on the etch surface of the teeth with a bristle brush, and brush a thin layer of liquid on the bonding surface of the brackets with another bristle brush (wet is enough).
4. Bonding: apply a small amount of paste with the mixing rod to the adhesive surface of the grooves coated with liquid agent to form a thin layer.
Glue the bracket and the tooth surface immediately after applying the paste.
Adjust the position of the bracket within 20 seconds, and press slightly for 5-10 seconds to prevent the bracket from sliding.
Remove excess liquid and paste after 40-60 seconds.
After curing for 5 minutes, orthodontic operation can be performed