ETCR6100 0.0A-600A High Accuracy DC/AC LCD Digital Clamp Meter Ammeter Tester Instrument

Condition: 100% Brand New
Item Type: Clamp Meter
Material: ABS
Product Size: Approx. 185 x 50 x 31 mm / 7.3 x 2 x 1.2 in
Weight: Approx. 326g / 11.5oz

Model ETCR6100
Jaw Size Approx. 30 x 35 mm / 1.2 x 1.4 in
Range DC/AC 0.0A-600A
Accuracy ±2%rdg, ±3%dgt
Resolution 0.1A
Data Interface RS232
Working Current 10mA
Functions DC current, AC current measurement, peak hold, online monitoring
Power Supply Alkaline dry battery 6F22 9V (not included), continuous use for 15 hours
Test Method Clamp CT, non-contact measurement
Display Mode 4-digit LCD display
LCD Size Approx. 32 x 15 mm / 1.3 x 0.6 in
Frequency Response Exchange: 45HZ-400HZ
Sampling Rate 2 times / sec
Polarity Indication Automatic identification when DC current detection, display ''-''
Wire Position The detected wire is at the center of the jaw, and the maximum deviation from the center position is increased.
Shift Full automatic switching
Line Voltage Line test below 600V
Software Yes, the data stored in the meter can be uploaded to the computer via software.
Data Storage 99 groups, flashing ''FULL'' indicates that the storage is full
Peak Hold Peak capture hold function, long press HOLD button during test without release, it will show peak value
Data Hold Data hold function: display ''DH''
Out of Range Display Out of range function: display ''OL''
Automatic Power Off After 5 minutes of power on, the meter automatically shuts down to reduce battery consumption.
Battery Voltage When the battery voltage drops to 7.2V, the battery voltage low sign is displayed, reminding to replace the battery.
Working Temperature and Humidity -10℃~50℃; below 80%rh
Temperature Error Limit temperature error -10℃~0℃ and 40℃~50℃, the maximum error increases by 1%rdg
Storage Temperature and Humidity -10℃~60℃ 70%rh below
Insulation Strength AC2kV/rms (between the iron core and the outer housing)