Driveway Paving Pavement Mold Concrete Paths Garden Walk Maker Mould Funny DIY 10 Grid 45CM

Feature:
This mold is design for the garden-lovers, who want to create their own decoration to make their gardens or parks more beautiful.
The innovative structure, to give the pavement in your yards some artistic senses.
Easy to use, no special skills required. Even an inexperienced person can create a beautiful pathway.
Reusable, running a continuous paths in any direction to build a new concrete path.
Great and perfect for creating pavement, walkways, paths, patios, picnic areas and other outdoor improvement.

 
Specification:
Material:PP Resin
Color:Black 
Size: 45X40X4cm=17.7"X15.7"X1.57"

Notice:
1.Please allow 1-3cm error due to manual measurement.

Listing including:
1 x Driveway Paving Brick Patio Concrete Slabs Paths Pathmate Garden Walk Maker Mould
(No retail packaging)

Package include:
1X Garden Walk Maker Mould

How to use this Concrete Paver Mold to build the pathways:
Step 1: 
Mix cement with water, according to package directions. When prepare to use, the concrete will be the consistency of oatmeal and thick enough to hold an edge when you slice into it with a shovel. 
Step 2: 
Fill the paver mold, scooping the concrete in with a shovel and making sure to fill each area. 
Step 3: 
Using rubber gloves, spread the concrete around the mold, filling in any gaps or low points. Tap the mold with your hand to eliminate any air bubbles. 
Step 4: 
Following the contours of the mold, smooth out the concrete, wiping away any excess. 
Step 5: 
Allow the concrete to set for a maximum of five minutes, then carefully remove the mold. For the next stretch, rotate the mold a quarter-turn and place it beside the paver just completed, angling slightly if you're creating a curving pathway. 
Step 6: 
After letting the concrete cure overnight, fill the cracks with dirt and wash away any excess. Wet the ground around the newly formed pavers to help them settle