Driveway Paving Mold Tools Concrete Pathmate Patio/Garden Walk Maker Mould

Description:
This DIY plastic molded paving mold is spread in Europe and America, is a personalized brick mold.
With this Molded Mulch Film,you can personalized create your own style garden path in minutes.
DIY plastic molded paving mold, is a personalized brick mold,laying out the effect posted up like blocks of stones.
The path is moreexotic, to create a style of their own garden path.
100% brand new and high quality

Feature :
Material: PPResin
Size: 43x43x4cm
Color: Black

Notice:Please allow 1-3cm error due to manual measurement.

How to use this Concrete Paver Mold to build the pathways:
Step 1: 
Mix cement with water, according to package directions. When ready to use, the concrete will be the consistency of oatmeal and thick enough to hold an edge when you slice into it with a shovel. 
Step 2: 
Fill the paver mold,scooping the concrete in with a shovel and making sure to fill each area. 
Step 3: 
Using rubber gloves,spread the concrete around the mold, filling in any gaps or low points. Tap themold with your hand to eliminate any air bubbles. 
Step 4: 
Following thecontours of the mold, smooth out the concrete, wiping away any excess. 
Step 5: 
Allow the concrete toset for a maximum of five minutes, then carefully remove the mold. For the nextstretch, rotate the mold a quarter-turn and place it beside the paver justcompleted, angling slightly if you're creating a curving pathway. 
Step 6: 
After letting the concrete cure overnight, fill the cracks with dirt and wash away any excess.Wet the ground around the newly formed pavers to help them settle.

Package include:
1 x Garden Walk Maker Mould