حرك مؤشر الماوس فوق الصورة للتكبير

الماركة:

عام

4.5L Ultrasonic Cleaner Stainless Steel Digital Timing Heating Lab Cleaning Machine 240HTDUS Plug 100-120V

د.إ 1,476.7050% خصم
د.إ738.35
لكل قطعةشامل ضريبة القيمة المضافة
نقبل
الدفع عند الاستلام
التحويل المصرفي
حد ائتمان

معلومات عن هذا المنتج

The ultrasonic working time is 1-99 minutes, temperature up to 80℃, suitable for different occasions

Adopt the most advanced bonding process, no nailing and cylinder removal situation

Adopt safe and efficient transducers, which can increase conversion efficiency and safety

The shell is made of high quality stainless steel material, which is beautiful and elegant.

Adopt high-quality components, high ultrasonic efficiency, powerful power and good cleaning effect

كمية (قطعة)

الحد الأدنى لكمية الطلب هو 1 قطعة

الحد الأدنى للطلب:1 قطعة

الشحن والإرجاع


طلبات الإرجاع
سياسة الإرجاع الخاصة بالبائع اعرف المزيد

سيتم عرض السعر النهائي وتواريخ التوصيل وخيارات الشحن الإضافية عند إتمام عملية الشراء والدفع.

معلومات عن البائع

معتمد

الصين

المزيد من هذا البائع

نظرة عامة

معرف وحدة إدارة المخزون للبائع:
TRE11011190159911D214-14683-24636
ورقة المواصفات الفنية متوفرة حسب الطلب
لا
Dangerous goods
No
Item height
30
Item length
34
Item weight unit
g
Item width
24
Item dimensions unit
cm
Item weight
4000

وصف المنتج

Item Type: Ultrasonic Cleaner
Model: 240HTD
Type: Digital Timing Heating
Inner Tank Capacity: 4.5L
Inner Tank Size: Approx. 300 x 155 x 100mm / 11.8 x 6.1 x 3.9in
Ultrasonic Frequency: 40KHz
Ultrasonic Power: 120W
Heating Power: 100W
Number of Vibration Heads: 2
Working Time Range: 1-99min
Temperature Range: 0-80℃
Inner Material: SUS304 Stainless Steel
Shell Material: Stainless Steel
Basket: Equipped
Sound Reduction Cover: Equipped

Q: What is an ultrasonic cleaner?
A: Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signal in the fluid. Microscopic bubbles are formed, and then implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned. Bubbles are small enough to penetrate microscopic crevices, cleaning them thoroughly and consistently.

Q: Which products can I clean this model?
A: Many products can be cleaned, such as glasses, necklaces, earrings, bracelets, electronics, watches, dentures, printer ink heads, shaver heads, nibs, coins, badges, pacifiers, etc.

Q: Which washing aid can be properly added for better cleaning during the cleaning process?
A: You can add cleaning liquid or detergent, such as: dishwashing liquid, soapy water, disinfectant, etc. However, do not add acid or alkaline solution, prevent ABS corrosion damage.

Q: Common products have 40HZ or 33HZ. What is the difference between these two frequencies?
A: These products are divided into high frequency and low frequency. Generally, the high frequency has 40HZ and 42HZ, and the low frequency generally has 28HZ and 33HZ. The higher the frequency, the larger the number of bubbles generated, the smaller the bubbles, and the better the cleaning effect for some blind holes; the lower the frequency, the smaller the number of bubbles generated and the larger the bubbles, which is suitable for cleaning large surfaces. Products with both frequencies can be better cleaned.