Hero image

Tradeling

مجموعة تريدلينج
product_image
product_image
product_image
product_image
product_image
product_image
product_image
product_image
product_image
product_image
1 / 10

المميزات

    السمات الرئيسية

    معرف وحدة إدارة المخزونTRE1GS02236-01D214-14683-32734
    الأبعاد (طول x عرض x ارتفاع)13cm x 9cm x 4cm
    الوزن80g
    موقع المخزونالصين
    بلد المنشأالصين
    العلامة التجاريةعام

    معلومات الشحن

    الوزن لكل قطعة

    80 g

    الأبعاد لكل قطعة (الطول × العرض × الارتفاع)

    13 x 9 x 4 cm

    وزن الكرتون

    80 g

    أبعاد الكرتون (الطول × العرض × الارتفاع)

    13 x 9 x 4 cm

    عدد القطع لكل كرتون

    1

    موقع المخزون

    الصين

    Descriptions:
    Digital LED tachometer adopts the latest A/D conversion chip and the high stability benchmark IC, adopts electronic chip component, reasonable circuit design. It can be applied to the measurement of voltage, current and external sensor to measure temperature, pressure, displacement and other physical quantities. Suitable for all kinds of digital instrument display.

    Features:

    Good stability, high precision and strong anti-interference ability.
    The external appearance adopts standard size and convenient  to install.
    Input pulse signal: NPN/PNP open collector ,contact switch, contactless switch, level pulse.
    Input signal voltage: low level: -30V -0.6 V, high level: 4-30V.
    Measuring range: frequency: 9999Hz, 999.9 HZ, 99.99 KHZ, automatic switching selection.

    Specifications:
    Measurement accuracy: ±0.1%
    Display mode: 0.56"LED
    Display refresh rate: >3 times/sec
    Working power supply: DC8-24V, 30mA, measurement range: 10-9999RPM

    Hall proximity switch : magnetic

    Appearance size: 80 x 42 x 25mm/3.14 x 1.65 x 0.98inch
    LED display(Optional): red, blue

    Weight: 80g(red),105g(blue)
    Overrange display: the first one shows "1" or "-1", and the latter three do not show

    Precautions:
    1. Connect the plug correctly according to the wiring diagram
    2. Should avoid strong electromagnetic interference and it is better to use shielded wire or double stranded wire for measuring conductors
    3. The counting signal of the counter and the switch of the zero clearing signal input or the circuit shall be as close as possible to the terminal of the counter to make the signal line as short as possible
    4. Avoid with other such as: high voltage wires or power wires and so on with same tube or twisted  trace line, in order to avoid unnecessary interference.If necessary, please use the shielded wire, shielding layer connect the"+" of the count terminals
    5. It is not recommended to use a mechanical switch or micro switch because they have a relatively short life span and can be counted by mistake after long time. If you use a mechanical switch or a micro switch, please try to use a better quality, so as not to miscount, and strongly suggest a magnetic control switch

    Package Included:
    1 x Tachometer

    1 x Hall NPN proximity sensor

    4 Digital LED Tachometer RPM Speed Meter+Hall Proximity Switch Sensor NPN(Red)

    جاهز للشحن

    187.89 د.إ
    د.إ99.58/قطعة
    -47%
    رسوم الاستيراد مستثناة
    سياسة الإرجاع الخاصة بالبائع اعرف المزيد
    4 قسط بدون فوائد، بدءًا من 24.89 د.إ
    المدفوعات آمنه
    حماية الخصوصية
    بائع معتمد

    الصفحة الرئيسية

    التصنيفات

    اكسبرس

    عربة التسوق

    الحساب