حرك مؤشر الماوس فوق الصورة للتكبير
الماركة:
عام220VAC Delay Relay Module RD1032-30S With Adjustable Potentiometer 30A Relay Switch
د.إ 77.1650% خصم
د.إ38.58
لكل قطعةشامل ضريبة القيمة المضافة
نقبل
الدفع عند الاستلام
التحويل المصرفي
حد ائتمان
معلومات عن هذا المنتج
This is a delay relay module,connect immediately after power on, disconnect after a delay.
Large loading capacity,support up to 30A current.
The module can directly connected to 220V electric supply.
The delay time can be set between 0~30S as you need.
Equipped with a potentiometer for convenient adjustment.
حجم الوحدة:
1 قطعة
عدد العبوات في كرتون واحد:
1
الحد الأدنى للطلب:
1 قطعة
موقع المخزون:
China
المهلة المقدرة (أيام عمل)
7 أيام
التوصيل دوليا:
سيتم عرض خيارات الشحن المتاحة والتكاليف وأوقات الشحن المتوقعة أثناء إتمام عملية الشراء والدفع.
أبعاد الكرتون (الطول ، العرض ، الارتفاع):
سم 15 x سم 9 x سم 3
وزن الكرتون:
68 جم
كمية (قطعة)
الحد الأدنى لكمية الطلب هو 1 قطعة
الحد الأدنى للطلب:1 قطعة
الشحن والإرجاع
طلبات الإرجاع
سياسة الإرجاع الخاصة بالبائع اعرف المزيد
سيتم عرض السعر النهائي وتواريخ التوصيل وخيارات الشحن الإضافية عند إتمام عملية الشراء والدفع.
نظرة عامة
معرف وحدة إدارة المخزون للبائع:
TRE11010190100611D214-14683-24581
ورقة المواصفات الفنية متوفرة حسب الطلب
لا
Dangerous goods
No
Item height
3
Item length
15
Item weight unit
g
Item width
9
Item dimensions unit
cm
Item weight
68
وصف المنتج
Item Type:Delay Relay Module
Working Voltage:AC220V
Delay Range:0~30S
Trigger Mode:Low-level signal, can be connected to buttons, proximity switches, remote control receiving module. (Or select NPN normally open type sensor)
Function: Turn on the output immediately after triggering, and automatically judge the output after a delay of X seconds. (Trigger during the delay is invalid).
Load capacity: 30A. Motor products are recommended to be used below 20A due to the large starting current.
Potentiometer Adjustment Mode: Clockwise to increase the delay; counterclockwise to shorten the delay
[Basic working principle]
After the module is powered on, the status relay does not work. When triggered (short-circuit button or sensor receives low-level signal), the relay immediately turns on and outputs 220V voltage, and starts timing. When the time is reached, the relay is turned off to close the output.
Triggering again during the delay process has no effect.
Working Voltage:AC220V
Delay Range:0~30S
Trigger Mode:Low-level signal, can be connected to buttons, proximity switches, remote control receiving module. (Or select NPN normally open type sensor)
Function: Turn on the output immediately after triggering, and automatically judge the output after a delay of X seconds. (Trigger during the delay is invalid).
Load capacity: 30A. Motor products are recommended to be used below 20A due to the large starting current.
Potentiometer Adjustment Mode: Clockwise to increase the delay; counterclockwise to shorten the delay
[Basic working principle]
After the module is powered on, the status relay does not work. When triggered (short-circuit button or sensor receives low-level signal), the relay immediately turns on and outputs 220V voltage, and starts timing. When the time is reached, the relay is turned off to close the output.
Triggering again during the delay process has no effect.