12E+ LCD Digital Multimeter Resistance Ohm AC DC Voltage Current Tester Ammeter 4000 Counts

Condition: 100% Brand New
Item Type: Digital Multimeter
Material: ABS
Color: As shown in the picture

Function Range Resolution Accuracy
AV voltage (40 Hz to 500Hz)1 4.000 V 0.001 V 1.0 % + 3
40.00 V 0.01 V
400.0 V 0.1 V
150px0 V 1 V
DC voltage 4.000 V 0.001 V 0.5 % + 3
40.00 V 0.01 V
150px0 V 1 V
AC voltage (mV) 400.0 mV 0.1 mV 3.0 % + 3
DC voltage(mV) 400.0 mV 0.1 mV 1.0 % + 10
Diode Test2 2.000 V 0.001 V 10%
Resistance(Ω) 400.0 Ω 0.1 Ω 0.5 % + 3
4.000 kΩ 0.001 kΩ 0.5 % + 2
40.00 kΩ 0.01 kΩ 0.5 % + 2
400.0 kΩ 0.1 kΩ 0.5 % + 2
4.000 MΩ 0.001 MΩ 0.5 % + 2
40.00 MΩ 0.01 MΩ 1.5% + 3
Capacitance3 40.00 nF 0.01 nF 2 % + 5
400.0 nF 0.1 nF 2 % + 5
4.000 μF 0.001 μF 5 % + 5
40.00 μF 0.01 μF 5 % + 5
400.0 μF 0.1 μF 5 % + 5
1000 μF 1 μF 5 % + 5
AC current μA 400.0 μA 0.1 μA 1.5 % + 3
(40 Hz to 400 Hz) 4000 μA 1 μA
AC current mA 40.00 mA 0.01 mA 1.5 % + 3
(40 Hz to 400 Hz) 400.0 mA 0.1 mA
AC current A 4.000 A 0.001 A 1.5 % + 3
(40 Hz to 400 Hz) 10.00 A 0.01 A
DC current μA 400.0 μA 0.1 μA 1.5 % + 3
4000 μA 1 μA
DC current mA 40.00 mA 0.01 mA 1.5 % + 3
400.0 mA 0.1 mA
DC current A 4.000 A 0.001 A 1.5 % + 3
10.00 A 0.01 A
Backlight Yes
¹All current, frequency, and duty cycle ranges are from 1 % to 100 % of the range. No input value less than 1% of the range was specified.
²Generally, open circuit test voltage is 2.0v and short circuit current < 0.6ma.
³The specification does not include the error caused by the test lead capacitor and capacitor plate (up to 1.5 nF for a range of 40 nF).
Function Overload protection Input impedance (nominal value) Common mode rejection ratio Normal mode rejection ratio
AC voltage 1000 V¹ >10 MΩ Under DC current '-
50 Hz or 60 Hz , > 60 dB
AC voltage (mV) 400 mV >1MΩ， 50 Hz or 60 H , >80 dB '-
DC voltage 1000 V¹ >10 MΩ Under DC current 50 Hz or 60Hz, >60 dB
50 Hz or 60 Hz, > 100 dB
DC voltage(mV) 400 mV >1MΩ， 50 Hz or 60 Hz, > 80 dB '-
1106 V Hz maximum value
General technical index
The highest voltage between any terminal and ground 1000 V
LCD 4000 counts, 3 updates per second
Battery 2 x AAA(not included), NEDA 15A, IEC LR6
Battery life Minimum 500 hours (50 hours in LED test mode without load. With load, battery life depends on the type of LED being tested.