The activator prevents the adhesive from being absorbed by the surface and increases the adhesion. It speeds up adhesion. Scope of Application: Bonding of wooden profiles. MDF, rubber, chipboard plastic and rubber bonding. Repair and fixing of wooden parts.

Color: transparent Hardening time: 5 ~ 10 sec

Chemical Structure: Adhesive: cyanoacrylate.

Activator: Heptan Viscosity: 1200-1700 cps

Heat resistance: -50 ° C to 80 ° C

Tensile strength: 20 N / mm2 Flash point:> 85 ° C

Shelf Life: 12 months

Application: The surfaces to be adhered must be dry, clean and free of dust and oil. Tighten the activator upright 20 cm away from the surface. Wait for 3 seconds. Apply Pattex Fast Adhesive on the same surface. Bring the surfaces together. It occurs at the time of adhesion.

Attention: Activator is flammable. Do not throw it into fire. Do not breathe. Activator box is pressurized. Do not crush, pierce, protect from direct sunlight. Activator and fast adhesive should not come into contact with skin and eyes. In case of contact, wash with plenty of water and consult a doctor. Keep out of the reach of children