Flycolor Programing Card for RC Cars ESC Electronic Speed Controller

Using Flycolor programing card to programming is the most convenient choice, only need to insert the signal cable of ESC into the programming card. Press the [ITEM] button to select the item you want, and press [VALUE] button to select the value of this item, then press the [OK] button, the VALUE window displays "S" which means this item was stored. (To restore the factory default value press the [RESET], then press [OK] ).

Specifications:
Brand: Flycolor
Item name: Programing Card
Running mode: FWD with brake / FWD and REV with brake / FWD and REV
Fixed area accelerator: 6% / 9% / 12%
Initial brake force: 0% / 5% / 10% / 20% / 30% / 40% / 50% / 60%
Low voltage protection: Non / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Start mode (punch): Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7 / Level 8 / Level 9
PWM: 8KHz / 12KHz
Max reverse force: 25% / 50% / 75% / 100%
Max brake force: 50% / 60% / 70% / 80% / 90%
Drag brake force: 0% / 5% / 10% / 20% / 40% / 60% / 80% / 100%
Timing set: 0° / 3.75° / 7.5° / 11.25° / 15° / 18.75° / 22.5° / 26.25°
Motor direction adj.: FWD / REV
Over-heart protection: Protection / Non
Lipo cells: Auto / 2S / 3S
Item dimensions: 95 * 650 * 150mm (deviation due to manual measurement)
Item weight: 44.5g

Package Information:
Package size: 10 * 7 * 2cm / 3.9 * 2.8 * 0.8in
Package weight: 50g / 1.8oz
Polybag package

Package List:
1 * Programing Card