Specification:
Model: S40 pro
Engraving size: 400*400mm
Engravable/cuttable materials
Carving material: wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective
Electroplated and painted metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate;
Cutting materials: cardboard, non-woven fabrics, wood, plywood, acrylic (transparency needs to be painted black), some thin plastic plates, sponge, metal sheets such as aluminum and stainless steel;
Machine power: 210W
Laser power: 180W (in cutting mode)
Laser output optical power: 40-48W
Laser wavelength: 455±5nm
Engraving precision: 0.01mm
Focusing method: fixed focus laser, no focusing
Laser protective cover: there is a protective cover on the laser to protect the user's eyes, no need to wear additional protective glasses. At the same time prevent pets from grabbing the laser point
Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system
Supported file formats: NC, BMP, JPG, PNG, DXF,
Data transmission method: USB connection
Package Size: 595x545x385mm/23.4x21.4x15.1in
Package Weight: 11.2kg/24.6lb

Packing List:
1 x linear guide X-axis assembly
1 x profile on the base
1 x Base lower profile
1 x laser module
2 x tank chain
1 x F30Pro dual pump air assist
1 x Mounting screw
1 x tool bag
4 x foam pads
1 x fixed focus film
3 x acrylic sheet
3 x wood chips
10 x wire tie
1 x desiccant
1 x clean brush
1 x clean cloth
1 x card reader
1 x TF card
1 x power adapter
1 x manual
1 x data cable
1 x Y axis left profile
1 x Y axis right profile
3 x foot bracket
1 x goggles