For different regions, we provide multiple LTE Cat-4/Cat-1 HATs to choose from:
SIM7600A-H 4G HATLTE Cat-4mainly applicable in North America (US, CA)SIM7600E-H 4G HATLTE Cat-4mainly applicable in Europe, Southeast Asia, West Asia, Africa, China, South KoreaSIM7600E LTE Cat-1 HATLTE Cat-1A7670E Cat-1 HATA7600E Cat-1/GSM/GPRS HATSIM7600SA-H 4G HATLTE Cat-4mainly applicable in Australia, New Zealand, Taiwan, Latin AmericaSIM7600CE 4G HATLTE Cat-4mainly applicable in China, and some Southeast Asia countriesSIM7600CE-CNSE 4G HATA7600C1 Cat-1/GSM/GPRS HATLTE Cat-1SIM7600G-H 4G HATLTE Cat-4the global version
Please check the supported bands according to your local service provider, select the proper one when placing order.
4G HAT FOR RASPBERRY PI
Enabling 4G / 3G / 2G Communication & LBS Positioning
Based on SIM7600CE-CNSE
Features At A Glance
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
- Supports LBS base station positioning
- Onboard USB interface, for testing AT Commands, establishing network connection, and so on
- Onboard CP2102 USB to UART converter, for serial debugging
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot, supports 1.8V/3V SIM card
- TF card slot for storing data like files, messages, etc.
- Onboard audio jack and audio decoder for making telephone call
- 2x LED indicators, easy to monitor the working status
- Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
- Baudrate: 300bps ~ 4Mbps (default: 115200bps)
- Autobauding baudrate: 9600bps ~ 115200bps
- Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
SpecificationsFREQUENCY BANDLTE Cat-4LTE-FDD: B1/B3/B5/B8LTE-TDD: B38/B39/B40/B413GUMTS/HSDPA/HSPA+: B1/B82GGSM/GPRS/EDGE: 900/1800 MHzSMS AND AUDIOSMSSupported types: MT, MO, CB, Text, PDUStorage: USIM card and ME (default)Audio featureSupports echo cancellationSupports noise reductionOTHERSPower supply5VOperating voltage5V / 3.3V (configured via jumper)Operating temperature-30°C ~ 80°CStorage temperature-45°C ~ 90°CDimensions56.01mm × 65.00mmStandard Raspberry Pi 40PIN GPIO
Compatible With Raspberry Pi Series Boards, Jetson Nano
Dial-Up On Windows/Linux
LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink) *3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink) *
* stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.
Cloud Communication
Supports Communication Protocols Including TCP/UDP/FTP/FTPS/HTTP/HTTPS
Telephoto Call & SMS Support
Making Telephoto Call Or Sending SMS By AT Commands, With Onboard Audio Jack
What's On Board
- SIM7600CE-CNSE
- CP2102 USB to UART converter
- NAU8810 audio decoder
- TXS0108EPWR voltage translator
- translates 3.3V/5V into 1.8V
- MP2128DT power chip
- MP1482 power chip
- Raspberry Pi GPIO header
- for connecting with Raspberry Pi
- SIM7600 control interface
- for connecting with host boards like Arduino/STM32
- SIM card slot
- supports 1.8V/3V SIM card
- TF card slot
- for storing data like files, messages, etc.
- 3.5mm earphone/mic jack
- for audio actions like making telephoto call
- USB interface
- for testing AT Commands, and so on
- USB TO UART interface
- for serial debugging, or login to Raspberry Pi
- MAIN antenna connector
- Module power switch
- Network status indicator
- Power indicator
- UART selection jumper
- A: access Raspberry Pi via USB to UART
- B: control the SIM7600 by Raspberry Pi
- C: control the SIM7600 via USB to UART
- PWR selection jumper
- PWR - 3V3: auto startup on power-up
- PWR - D6: startup/shutdown by the Raspberry Pi D6 pin
- Flight mode selection jumper
- NC by default, no flight mode control pin
- Flight - D4: flight mode is controlled by the Raspberry Pi D4 pin
- Operating voltage selection jumper
- VCCIO - 3.3V: set operating voltage as 3.3V
- VCCIO - 5V: set operating voltage as 5V
- USB connector solder pads
- BOOT forced programming solder pads
Pinout Definition
Outline Dimensions
Resources & Services
WIKI: SIM7600CE-CNSE_4G_HAT
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Selection Guide SIM7600CE-CNSESIM7600CE-TSIM7600E-HSIM7600A-HSIM7600G-HApplicable regionsChinaEurope/Southeast Asia/West Asia/Africa/China/South KoreaNorth AmericaGlobalBandLTE Cat-4LTE-FDDB1/B3/B5/B8LTE-TDDB38/B39/B40/B41LTE-FDDB1/B3/B5/B7/B8/B20LTE-TDDB38/B40/B41LTE-FDDB2/B4/B12LTE-FDDB1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66LTE-TDDB34/B38 /B39/B40/B413GUMTS/HSDPA/HSPA+B1/B8TD-SCDMAB34/B39UMTS/HSPA+B1/B5/B8UMTS/HSPA+B2/B5UMTS/HSDPA/HSPA+B1/B2/B4/B5/B6/B8/B192GGSM/GPRS/EDGE900/1800 MHzN/AGSM/GPRS/EDGE850/900/1800/1900MHzGNSSN/AGPS/Beidou/GLONASSData RateLTE Cat-4150Mbps(DL)/50Mbps(UL)3G (HSPA+)42Mbps(DL)/5.76Mbps(UL)2G (EDGE)236.8Kbps(DL/UL)N/A236.8Kbps(DL/UL)2G (GPRS)85.6Kbps(DL/UL)N/A85.6Kbps(DL/UL)Software FeaturesNetwork protocolTCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNSDial-up protocolPPP/NDIS/RNDISUSB driverWindows XP/7/8/10, Linux (driver free for Raspbian)Hardware InterfacesSIM card slotCompatible with 1.8V and 3V SIM cardUARTSupports AT commands through UART, compatible with 3.3V/5V operating voltageUSB portSupports AT commands testing, network communication, firmware upgrading, etc.USB to UARTSupports serial debugging, or login to Raspberry PiAudio jackSupports audio actions like making telephoto callTF card slotYes, for storing data like files, messages, etc.N/AYesAntenna connectorLTE main antennaLTE main antenna + LTE diversity antenna + GNSS antennaApplicationsExamplesHealthcare, smart payment, Internet talk, environmental monitoring, energy monitoring, fleet management, smart industry, intelligent agriculture, etc.
