hours: 10000H
Working temperature: 0℃~70℃
Storage temperature: -40℃~85℃
Sintering temperature: 800℃
Carving materials: basswood, pine, paulownia, plywood, yellow peach, mahogany, density board, kraft paper, non-transparent acrylic board, resin, rock board, ceramics, leaves, bamboo, cardboard, plastic, leather, PCB version, alumina, Non-reflective electroplated and painted metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate;
Cutting materials: kraft paper, hardwood, paulownia, basswood, pine, softwood, bamboo chips less than 3MM, low-density foam board, non-transparent acrylic board, ABS, PP and other boards less than 3MM thick, cardboard, non-woven fabric, wood board, acrylic, Some thin plastic sheets, sponges;
Supported file formats: NC, BMP, JPG, PNG, DXF
Power supply: 100-240V AC, 50/60HZ Output: 12V 5A
Packing List:
1×Mounting screw
1× tool kit
4×foam foot pads
3×acrylic sheets
3×wood chips
1×desiccant
1×Brush
1×dust-free cloth
1×power adapter
1×Instruction Manual
1×data cable
1×laser module
1×X-axis assembly
1×Y axis left profile
1×Y axis right profile
1×base upper profile
1×base lower profile
3×foot bracket
Precautions:
●Please read the user manual carefully before operating the laser engraving machine.
●When operating the laser engraving machine, please install the laser protective cover; if it is not installed properly, you need to wear goggles.
●Do not touch the laser with your hands, otherwise your hands may be burned.
●Please avoid b impact on the machine.
●Children under 14 years old are prohibited from using this product. Children over 14 years old require adult supervision.
●The laser cannot be applied directly to any specular reflective object, which may cause injury to the operator or burn the laser. "
