6 Colors Universal 270/271 Refillable Ink Cartridge With ARC Chip For Canon PIXMA MG7720/5020

Description:
This empty refillable ink cartridge withARC chip perfect for Canon printer. With transparent cartridge, it is easy toview how much ink left to prevent from lack of ink to cause air bubbles or howmuch ink filled in to avoid overfill for easy operation. It is very easy toremove the plug for ink refill and replace it back after. Perfect for novice.Save both money and time for you.
 
Features:
Transparent PP Material: With transparentcartridge, it is easy to view how much ink left to prevent from lack of ink tocause air bubbles or how much ink filled in to avoid overfill.
Low Consumption & High Efficiency:Designed to be filled and refilled hundreds of times. Auto reset chipsinstalled. The ink level will reset to full once you refill the cartridge.Refillable ink cartridge allow countless refill,save your printing cost.
Universal Compatibility: Empty refillableink cartridges,can be refilled  all typesof ink. Universally suitable for Canon ink cartridge Model PGI-270/CLI-271.
User Friendly: Do not leak ink or drop ink.Built-in filter to prevent printhead clogged.
Easy to Operate: It is very easy to removethe plug for ink refill and replace it back after.
 
Specifications:
Cartridge Number: for Canon PGI-270/CLI-271
Applicable models: for Canon PIXMA MG7720/5020/5720/6820/TS8020/9020
Type: Universal
Color: PGBK, BK, C, M, Y, GY
Volume: BK,C, M, Y, GY - 12.5ML   PGBK - 24ML
 
Package List:
1 * BK Empty Refillable Cartridge with AutoReset Chip without Ink
1 * C Empty Refillable Cartridge with AutoReset Chip without Ink
1 * Y Empty Refillable Cartridge with AutoReset Chip without Ink
1 * M Empty Refillable Cartridge with AutoReset Chip without Ink
1 * PGBK Empty Refillable Cartridge withAuto Reset Chip without Ink
1 * GY Empty Refillable Cartridge with AutoReset Chip without Ink

Installation Notes:
1. The nozzle protection clip should beremoved before the ink cartridge is applied to the machine (for some products),the tail (air vent seal) on the nozzle of the cartridge must also be torn off.
2. When replacing a new cartridge, cleanthe printhead before the original cartridge runs out of ink.
3. After installing the cartridge, let thecartridge stay in the cartridge for 5 minutes. Clean the printhead until thenozzle check is normal.
4. If there is a disconnection or lack ofcolor, let the cartridge stay in the cartridge for 10-15 minutes.
5. If the print problem persists, check theprint head 1 - 3 times until it is unobstructed.
6. If the printer does not recognize theink cartridge, remove the ink cartridge and reinstall it. If the printer stilldoes not work, try restarting the printer.
7. After the cartridge is opened, it shouldbe used within 6 months to ensure good printing results.
8. Do not remove the ink cartridge from theprinter until the ink has run out.
9. The printer is turned on at least once aweek to prevent the print head from clogging.