5Colors PGI-850/CLI-851 Refillable Ink Cartridge With ARC Chip For Canon PIXMA MG6380/MG5480

Description:
This Empty refillable ink cartridge  with ARC chip perfect for Canon printer. Withtransparent cartridge, it is easy to view how much ink left to prevent fromlack of ink to cause air bubbles or how much ink filled in to avoid overfillfor easy operation. There are easy-refill hole and rubber plug on the top ofeach cartridge. It is very easy to remove the plug for ink refill and replaceit back after. Save both money and time for you.
 
Features:
Transparent PP Material: With transparentcartridge, it is easy to view how much ink left to prevent from lack of ink tocause air bubbles or how much ink filled in to avoid overfill.
Low Consumption & High Efficiency:Designed to be filled and refilled hundreds of times. Auto reset chipsinstalled. The ink level will reset to full once you refill the cartridge.Refillable ink cartridge allow countless refill,save your printing cost.
Universal Compatibility: Empty refillableink cartridges,can be refilled  all typesof ink. Universally suitable for Canon ink cartridge Model PGI-850 CLI-851.
User Friendly: Do not leak ink or drop ink.Built-in filter to prevent printhead clogged.
Easy to Operate: It is very easy to removethe plug for ink refill and replace it back after.
 
Specifications:
Cartridge Number: for Canon PGI-850  CLI-851
Applicable models: for Canon PIXMA MG5480,for Canon PIXMA MG6380, for Canon PIXMA MX728, for Canon PIXMA MX928, for CanonPIXMA IP7280
Type: Universal
Color: PGBK, BK, C, M, Y
Volume: BK, C, M, Y - 12.5ML    PGBK - 24ML
 
Package List:
1 * Black Empty Refillable Cartridge withAuto Reset Chip without Ink
1 * Cyan Empty Refillable Cartridge withAuto Reset Chip without Ink
1 * Yellow Empty Refillable Cartridge withAuto Reset Chip without Ink
1 * Magenta Empty Refillable Cartridge withAuto Reset Chip without Ink
1 * PGBK Empty Refillable Cartridge withAuto Reset Chip without Ink
 
Installation Notes:
1. The nozzle protection clip should beremoved before the ink cartridge is applied to the machine (for some products),the tail (air vent seal) on the nozzle of the cartridge must also be torn off.
2. When replacing a new cartridge, cleanthe printhead before the original cartridge runs out of ink.
3. After installing the cartridge, let thecartridge stay in the cartridge for 5 minutes. Clean the printhead until thenozzle check is normal.
4. If there is a disconnection or lack ofcolor, let the cartridge stay in the cartridge for 10-15 minutes.
5. If the print problem persists, check theprint head 1 - 3 times until it is unobstructed.
6. If the printer does not recognize theink cartridge, remove the ink cartridge and reinstall it. If the printer stilldoes not work, try restarting the printer.
7. After the cartridge is opened, it shouldbe used within 6 months to ensure good printing results.
8. Do not remove the ink cartridge from theprinter until the ink has run out.
9. The printer is turned on at least once aweek to prevent the print head from clogging.