Description:
    ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry. Single 0.5 /0.8 /1mm thick sheet, ultem 1000 grade, installs quickly on top of existing flat build platforms.

Features:
ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
Remove film from both sides before using: The protective film guards against scratches during shipping and handling.
Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results; Sheet can be asily cut down to desired size by scoring with a utility knife.
Single 0.5/ 0.8 /1mm thick sheet, ultem 1000 grade, installs quickly on top of existing flat build platforms.
 Works especially well for 3D printers.

How to use:
There are two methods to attaching the PEI to your print bed. The first method is to just clamp the sheet to the print bed using binder clips. The second method, get 468MP Transfer Tape and use it to stick the PEI to the print bed.
Once the PEI sheet is attached, re-level your print bed and you are ready to go!
It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 2000 grit paper will also give the PEI sheet more life.

Specification:
Condiiton: 100% Brand New
Size: 300mm x 300mm x (0.5/0.8 /1mm) / 11.81inch x 11.81 inch x (0.02 x 0.03 x 0.04 in) (appr.)
(Thickness depends on your order)

Package Included:
1 x PEI Sheet
1 x Adhesive Tape (300 x 300mm)

Notice:
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please understand that colors may exist chromatic aberration as the different placement of pictures.